4
3
Press the [No] key.
The "PAPER SOURCE SETUP"
menu appears.
4
Press the
"ENVELOPE", and then press the
[Yes] key.
The "PAPER SIZE" menu appears.
5
Press the
The length (x) setting appears.
6
Using the 10-Key Pad, type in "200"
for the length (X), and then press
the [Yes] key.
The length of the paper (x) can
be set between 140 mm and
432 mm.
To correct the entered value, press the [No] key.
Tip
Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
4-10
or
key to select
key.
Useful Operations
NV LOP
Di1611/Di2011
x x