Automatically Selecting The Paper Source - Konica Minolta Di1611 Advanced Information

Before Making Copies

Automatically Selecting the Paper Source

With the auto tray switching feature, printing can continue with paper from
a different paper drawer if the currently selected drawer runs out of paper
during printing.
Note
If paper is loaded into the Manual Bypass, the auto tray switching
feature does not function.
The auto tray switching feature functions if the currently selected paper
drawer and another paper drawer (except the Manual Bypass) meet the
following conditions.
The paper is the same size.
The paper is the same type.
The paper is positioned in the same orientation.
The "PAPER TYPE" function is set to "PLAIN", "RECYCLE" or
"1-SIDE" for both paper trays.
Tip
If the optional Multiple Bypass and the 5th paper drawer are installed,
a maximum of 1350 copies (on A4 C paper) can be made
continuously.
When making a large number of copies continuously, load all paper
drawers (except the Manual Bypass) with paper meeting the
conditions listed above.
If there is no paper in any paper drawer, a message appears indicating
that paper must be replenished. Copying may not continue if paper is
loaded into other paper drawers than the one specified in the
message.
Di1611/Di2011
5
5-23