Limited Use Of The Copier In Trouble - Minolta CF5001 User Manual

When "Call for Service" Message Is Displayed (continued)
3.
Unplug the machine.
4.
Contact your service representative and report the condition and
code No.

Limited Use of the Copier in Trouble

If the message shown below is displayed on the Call for Service Screen, you may
continue operating the copier on a limited function basis and utilize the trays and
ADU that are not affected by the trouble. To obtain this limited functionality of the
copier, consult your service representative. Be sure to utilize the limited function only
temporarily, and arrange for machine repair immediately.
1.
If the limited use of the copier is available, the following
message is displayed in the message area instead of the
Report code.
ex.
Tray 2 failure
Press AUTO to select except this tray
2.
Press [AUTO RESET].
Please switch ON/OFF
E 18-2
Make note of the Report code No.
3.
Turn OFF then ON the power switch.
A copying job can continue without using the troubled portion of the
machine (ex. Tray 2).
EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE ABOVE
O P E R AT I O N , B E S U R E TO C O N TAC T YO U R S E RV I C E
REPRESENTATIVE IMMEDIATELY WHEN THE CALL FOR SERVICE
SCREEN IS DISPLAYED.
5-3