Minolta CF5001 User Manual page 406

[43] Screen (FullColour - Text/Photo)
Specify the initial state of the SCREEN setting in Full Colour mode with Text/Photo
specified in Special Original setting.
[44] Screen (FullColour - Photo)
Specify the initial state of the SCREEN setting in Full Colour mode with Photo
specified in Special Original setting.
[45] Screen (Monochrome - Text/Photo)
Specify the initial state of the SCREEN setting in Black mode with Text/Photo
specified in Special Original setting.
[46] Screen (Monochrome - Photo)
Specify the initial state of the SCREEN setting in Black mode with Photo specified in
Special Original setting.
[47] Screen (MonoColour - Text/Photo)
Specify the initial state of the SCREEN setting in Single Colour mode with Text/Photo
specified in Special Original setting.
[48] Screen (MonoColour - Photo)
Specify the initial state of the SCREEN setting in Single Colour mode with Photo
specified in Special Original setting.
[49] Colour gamut
Specify the latitude of the colour in printing images.
NOTE:
• If Wide is selected, a blur may appear in high density area of the printed
image.
• Be sure to select Wide before making calibration on the printer controller.
When the calibration is completed, be sure to resume the previous setting.
14-42
[13] Memory Switch Setting (continued)