Table of Contents
Advertisement
2
1. Installing the Copier
Installation Site
To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location wh ich
meets the following requirements.
A place away from a curtain or the like tha
may catch fire and burn easily.
An area where there is no possibility o
being splashed with water or other types of
liquid.
An area free from direct sunlight.
A place out of the direct air stream of an air
conditioner, heater, or ventilator.
A well-ventilated place.
A dry place.
Power Source
The power source voltage requirements are as follows.
Use a power source with little voltage fluctuation.
Voltage Fluctuation
Frequency Fluctuation
Space Requirement
To ensure easy copier operation, supply replacements and service maintenance, adhere to the
recommended space requirements detailed below.
Be sure to allow a clearance of 150mm or more at the back of the copier as there is a ventilation
*
duct.
1,632
1,359
1,055
230
405
:
Within 10%
:
Within 0.3%
650
304
1151O001AB
A dust-free location.
An area not subject to undue vibration.
A stable and level location.
A place where ammonia or other organic
gas is not generated.
A place which does not put the operator in
the direct stream of exhaust from the copier.
A place which is not near any kind of
heating device.
1,138
467
Scale: mm
671
1151O002AB
Advertisement
Table of Contents
