Adjusting Position Of Copy Image (Image Shift) - Minolta CF5001 User Manual

Adjusting Position of Copy Image (Image Shift)

Use Image Shift to adjust the position of copy images, e.g. for the purpose of
creating a new binding margin on originals to make it easier for filing purposes.
Page Space function is available only when Booklet or 2 Repeat mode of Repeat has
been already selected. Use this function to make the desired amount of blank space
between the two images on a page. See the illustration on p. 10-47 for details.
If image loss is likely, select the Reduce & Shift mode instead of regular Image shift.
See p.10-48.
Specifications for Image Shift
❒ Shift amount: 0 to 250 mm in 1 mm increments
Setting in 0.1 mm increments using up/down arrow key is also available by Key
Operator setting. See p. 14-37 to 14-42.
❒ Incompatible Conditions: Multi-Page Enlargement, AUTO Layout, Storing
images in Overlay Memory
Original
1.
Select the copy mode and paper size from the Basic Screen,
as required.
2.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Right
Up
Left
Up
Copies
Right
Down
Left
Down
10-45