Minolta CF5001 User Manual page 251

Inserting Images into Printed Sets (Image Insert) (continued)
7.
Scan the document feeder images:
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not
exceeding 100 sheets and load them from the block with the first page.
8.
Press [START].
The originals positioned in the document feeder will be scanned into
memory.
9.
Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen glass, then close the
document feeder.
PLACE AND SCAN THE ORIGINALS IN ORDER.
10.
Press [START].
11.
Repeat steps 9 and 10 for all originals.
• Memory overflow may occur during scanning. See p. 5-9 to p. 5-10.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
12.
Touch STORE to exit the Store mode.
13.
Press [START].
The copier will start printing when ready for output.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
10-19