Copying Z-Folded Originals (Z-Folded Original) (continued)
3.
Touch Z-Folded original, then touch OK.
The Special Original popup menu will be restored.
4.
Touch OK to return to the Basic Screen.
5.
Select additional copying features, as desired.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
7.
Position Z-folded original(s) FACE UP in the document feeder.
• See p. 3-7 for details on positioning originals.
• Use RADF store mode (p. 3-33 to p. 3-34) when the original count exceeds
100.
8.
Press [START].
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
9-9