Table of Contents
Advertisement
7.
Specify the original set direction.
Touch SPECIAL ORIGINAL on the Basic Screen to display the Special
Original popup menu.
Touch to select the desired original set direction, then touch OK to return to
the Basic Screen.
8.
Select additional copying features, as required.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
10.
Position originals in the document feeder.
See p. 3-4 to p. 3-7 for details on positioning originals.
11.
Press [START].
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
Punching File Holes in Copies (Punch) (continued)
8-13
Advertisement
Table of Contents
Troubleshooting
