Weekly Timer - Minolta CF5001 User Manual

[9] Weekly Timer

The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis, and can be programmed specifically for lunch
breaks, weekends and holidays, or any time the copier is not required.
In addition, Timer Interrupt can be enabled (with or without a password requirement)
to allow temporary use of the machine during periods when power is shut down by
the Timer function.
This function can be accessed only by the Key Operator after a unique 4-digit
Weekly Timer password is entered.
To ensure the security of this management function, it is recommended that you
establish a unique password, and keep it in a confidential file.
The Weekly Timer is not initially activated. If this function needs to be activated on
your machine, contact your service representative.
Conditions required to use the Weekly Timer
• The power plug is inserted into the socket. The Weekly Timer will not function with
the machine being unplugged, while the setting data will remain.
• The power switch is turned on.
• The current date and time are correctly set.
The following Weekly Timer settings can be made.
[1] Weekly timer ON/OFF setting
Enable and disable the Timer function.
[2] Timer Setting
Specify the times that the copier will turn ON and OFF for each day of the week
or the entire week.
[3] Timer action ON/OFF Setting
Specify the working days of the machine by the Timer, for all Mondays through
Sundays, and/or individually for each day of the specified month.
[4] Lunch hour off setting
Specify the lunch time interval during which the copier will turn off and on.
[5] Timer interrupt password set
Require password entry for the Timer off function and establish the amount of
usage time.
14-26