Table of Contents
Advertisement
8.
Load the cover sheet paper into the optional cover inserter of the
FN-120/FN-9 finisher.
If the paper size loaded in the cover inserter is not suitable, the following
messages will be displayed and copying will be unavailable till the correct
size is loaded.
Please load cover sheet in
cover sheet feeder
Adapt paper size between
cover sheet and selected paper
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
10.
Position originals.
See p. 3-4 to p. 3-9 for details on positioning originals.
11.
Press [START].
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
Cover Sheet Feeding (continued)
Upper tray
Lower
tray
8-21
Advertisement
Table of Contents
Troubleshooting
