Minolta CF5001 User Manual page 404

[13] Memory Switch Setting (continued)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate
magnification ratio to correspond to the selected paper size.
[13] RADF AMS
After detecting the original size placed on the RADF the copier automatically selects
an appropriate ratio for the copy when paper size is selected manually.
[14] Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
[15] Platen original size detect
Select the series of the original paper size detected from the platen glass.
[16] RADF original size detect
Select the series of the original paper size detected from the RADF.
[17] Platen orig. size detect (SMALL)
Select the minimum original size detected from the platen glass.
[18] Rotation
Select to activate the Rotation function, activate Rotation only when APS/AMS
functions, or activate Rotation only when APS/AMS/Reduce functions.
[19] Staple mode reset-function
Staple mode is automatically canceled after a job is completed with Staple sort mode
ON. (Sort mode is selected.)
[20] Job offset operating
Set the copier to offset the copies of different jobs.
[21] Continuation print
Set the copier to output multiple reserve jobs in succession.
[22] Key click sound
Activate or deactivate the sound each time a key is pressed on the touch panel.
[23] 1 SHOT indication time
Select the SHOT indication time function.
[24] Power save screen
Select the screen to display when pressing the [POWER SAVER ON/OFF] key.
[25] START key latch function
Activate or deactivate the latch function.
[26] STOP key function
Select to display or not to display the confirmation message when [STOP] key is
pressed.
[27] Auto select of Booklet copy
Set the copier with FS-215 mounted to automatically select the Booklet mode when
Stitch&Fold or Fold output mode is selected.
14-40