Making Double-Sided Copies (1A2, 2A2); Using Radf - Minolta CF5001 User Manual

Making Double-Sided Copies (1a2, 2a2)

The Basic Screen is initially set to 1-1 copy mode to make single-sided copies from
single-sided originals.
Follow the procedure below to make double-sided copies from the originals scanned
from the document feeder or from the platen glass.

Using RADF

Select the copy mode according to the original type (single-sided or double-sided).
Specifications for Double-Sided Copying Using RADF
❒ See p. 12-9 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Face Up, Multi-Page Enlargement, Non-Image Area
Erase, Verti./Horiz. mode or Auto mode of Repeat, AUTO Layout, Storing
Image in Overlay Memory
2-2 Copying
Double-sided original
1-2 Copying
1.
a
Touch 1 2 or 2
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Front
Front
Front
Front
Front
Front Back
Front Back
Front Back
Front Back
Front Back
Single-sided original
a
2 on the Basic Screen to highlight it.
Front
Front
Front
Front
Front
Duplex copy
Duplex copy
Front
Front
Front
Front
Front
3-25