Table of Contents
Advertisement
❒ Incompatible with Group using Secondary (sub) tray: 1a2 or 2a2 mode using
platen glass (unless Platen store mode is used), Proof Copy, Fold, Stitch &
Fold, Three-Fold, Trimming, Punch, Cover sheet feeding, Sheet/Cover
Insertion, Chapter, Combination, Booklet, Image Insert, Repeat
❒ Incompatible with Face Up exit: 1a2 or 2a2 mode using platen glass, Fold,
Stitch & Fold, Three-Fold, Trimming, Cover sheet feeding
1.
Close the RADF securely, then press [AUTO RESET].
Check that the Sort mode icon is displayed and the OUTPUT MENU key is
highlighted in the OUTPUT area.
Key Operator can change the initial output mode. See p. 14-10.
2.
Select the desired output mode.
To set output to the Primary (main) tray (except Staple): proceed to the
next step.
To set Staple mode: proceed to step 4.
To set output to the Secondary (sub) tray: proceed to step 5.
3.
Touch OUTPUT MENU to display the Output Mode popup menu,
then touch MAIN TRAY to highlight it.
To select Non-sort mode, deselect all the keys in the OUTPUT<MAIN
TRAY> area.
To select Sort mode, touch SORT to highlight it.
To select Group mode, touch GROUP to highlight it.
To select Face up mode, touch FACE UP in the SURFACE area to
highlight it. The Face up mode is compatible with Non-sort, Sort and Group
modes.
Using Face up mode and Non-sort or Sort mode in combination, the sorted
copies will be output in the reverse order of the originals.
Touch OK on the Output Mode popup menu to return to the Basic Screen.
OUTPUT MENU will be highlighted, and the output icon of the selected
output mode will be displayed in the OUTPUT area.
Proceed to step 6.
See p. 3-50 for details of the output icons displayed on the Basic Screen.
Output Mode for Machine with Finisher (continued)
3-47
Advertisement
Table of Contents
Troubleshooting
