Setting E.K.C. Function
Make the following Key Operator settings concerning the E.K.C. function using the
web browser on a PC.
• E.K.C. Data Add (see step 4.)
Add a new E.K.C. data (password, name, and copy limit) to the E.K.C. list.
• E.K.C. Data List (see step 5.)
Change or delete the E.K.C. data (password, name, or copy limit) in the list, or
reset the counters.
• E.K.C. Function Setting (see step 6.)
Specify the following E.K.C. function settings.
Switching the E.K.C.: ON/OFF
Effect when the copy limit is reached: Immediately / After job / Warning
E.K.C. password: 8 digits / under 8 digits
E.K.C. password input timing: Auto reset timer/ Complete job
Wrong E.K.C. password (from printer): Accept / Reject
The above settings can also be made on the machine itself, except for the
Wrong E.K.C. password (from printer) setting. Some settings may require
operations on the machine. Refer to pages 14-12 and 14-19.
1.
Open the Web Utilities window.
2.
Click on [Environment Setup].
3.
Display the E.K.C. Function Setting window.
Enter the 4-digit Key Operator password, then click on [Apply].
11-9