Changing Colours Using CMYK Value (Colour Balance Adjustment)
Change the hue by varying the image's cyan (C), magenta (M), yellow (Y), and black
(K) individually or mutually.
This adjustment can be made in each density area (shadow, mid tone, or highlight) of
the individual colour, or in the whole density area of each colour. The adjustment
value ranges from -10 to +10.
1.
Touch IMAGE ADJUST on the Basic Screen.
2.
Touch COLOUR BALANCE to display the Colour Balance
Adjustment Screen.
3.
Select the desired density area.
Check the shadow, mid tone, and highlight areas of the original, then select
the desired density area to adjust the colour balance. If the adjustment is
necessary for the whole density area, touch WHOLE AREA to highlight it.
7-24