Reducing The Power In Standby Mode (Auto Low Power); Shutting Off Automatically (Auto Shut-Off) - Minolta CF5001 User Manual

Reducing the Power in Standby Mode (Auto Low Power)

This function automatically lowers the power after a specified period (initially 15
minutes) of copier inactivity. The LCD screen will go off.
The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15 minutes/
30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes in the Key
Operator mode. For information about the Key Operator setting, see p. 14-36.
To start a copying job, press any key on the control panel.
The Auto low power will be released and the LCD screen recovers usual brightness.
• If the Auto Shut-Off function activates at the same time, the power will be
turned off without the LCD screen becoming dark.
• The LCD screen will not go off during a duplex copying job or when the
Jam Position Screen is displayed.

Shutting Off Automatically (Auto Shut-Off)

This function automatically shuts off the power after a specified period (initially 90
minutes) of copier inactivity.
To start a copying job, press [POWER SAVER ON/OFF].
The copying operation will become available.
• The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes in the Key Operator mode. For information about the
Key Operator setting, see p. 14-36.
• When "Timer interrupt mode / Enter password" is displayed after pressing
[POWER SAVER ON/OFF], see p. 8-2 and follow the procedure to
continue.
Turning On the Power Switch (continued)
2-19