Minolta CF5001 User Manual page 98

Making Double-Sided Copies (1a2, 2a2) (continued)
5.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
7.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.
8.
Replace the original on the platen glass with the back side image
original, then press [START].
Repeat this step until all originals are scanned.
• Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
• To delete the scanned data without printing, press [STOP]. See p. 3-13 for
details.
9.
After all originals are scanned, touch STORE to exit the Store
mode.
STORE will no longer be highlighted.
10.
Press [START] to print.
All the data in memory will be output.
Press [STOP] to suspend the printing job. See p. 3-13 for details.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
3-30