Minolta CF5001 User Manual page 110

Output Mode for Machine without Finisher (continued)
Specification for Output Modes without Finisher
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Program Job, Repeat, AUTO Layout,
Non-Image Area Erase, Stamp (Numbering)
❒ Incompatible with Rotation Group mode: Proof Copy, Mixed Original, Z-Folded
Original, Non STD Size (FULL AREA), Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Dual Page, Program Job, Repeat, AUTO
Layout, Non-Image Area Erase, Stamp (Numbering), Overlay
❒ Incompatible with Rotation Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, Repeat, AUTO Layout, Non-Image Area Erase
1.
Load copy paper.
When using Rotation sort or Rotation group mode, load the same paper
size into two trays in different orientation.
• Do not release the Rotation function.
• When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Select the desired output mode.
To select Face down non-sort mode:
Confirm that OUTPUT MENU is not highlighted on the Basic Screen.
Face down non-sort mode is initially selected. Key Operator can change the
initial output mode. See p. 14-10.
To select Group, Rotation group, Rotation sort or Face up mode:
Touch OUTPUT MENU on the Basic Screen to display the Output Mode
popup menu, then touch the desired mode key to highlight it.
To use Face up mode in combination, simply touch FACE UP to highlight it.
3-42