Setting Print Quantity; To Set Print Quantity; To Change Print Quantity - Konica Minolta 7045 Instruction Manual

Setting Print Quantity

This section describes how to set or change print quantity.
I To Set Print Quantity
The copier is initially set to copy the original set in
amounts determined by the print quantity setting, then
outputs sorted sets.
1
Enter the desired print quantity from the
control panel keypad.
Entered quantity will be displayed on the touch
panel.
I To Change Print Quantity
Follow the procedure below to change the print quan-
tity which has been already entered.
1
C
Press
CLEAR QTY.
The quantity displayed on the touch panel will re-
turn to 1.
2
Enter the correct quantity.
Entered quantity will be displayed on the touch
panel.
3-6
CHECK HELP
APPLICATION
OUTPUT
JOB MEMORY
AUTO RESET
.
CHECK HELP
APPLICATION
OUTPUT
JOB MEMORY
AUTO RESET
SCAN PRINT
1 2 3
4 5 6
7 8 9
0
CLEAR QTY.
SCAN PRINT
1 2 3
4 5 6
7 8 9
0
CLEAR QTY.