Setting Scan Transmission Function - Konica Minolta BIZHUB PRO C6500E User Manual

19
19.4

Setting scan transmission function

Follow the procedure below to register, change, or delete the address for the
transmission of the scanned image data using the web browser. For details
of the Scan Transmission Setting, contact your service representative.
The Scan Transmission Setting is available in the following condition:
- Using Scan Transmission Setting in the administrator setting, you cannot
newly register an E-mail/HDD/FTP/SMB address or group the entries.
- The [Scan transmission setting] key appears in the Scan Transmission
Setting window only when the optional Image Controller is installed in the
machine.
- Click on the DAILY USE check box in the E-mail Registration table, if the
data is frequently used.
- The symbols that cannot be displayed in the entry box will be ignored, if
entered.
- The HDD Box No. will be registered as a 9-digit number.
For example, entering [1] will be registered as [000000001].
1
Open the Web Utilities window.
2
Click on [Machine Manager Setting].
The Enter Network Password dialogue box will be displayed.
19-24 bizhub PRO C6500 / bizhub PRO C6500e
Web Utilities setting