Setting Date And Time - Kyocera FS-1128MFP Operation Manual

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
Be sure to set the time difference before setting the date and time.
Login User Name: L b
********************
Login Password:
[ Menu
Sys. Menu/Count.: a b
5 User Property
6
********************* Common Settings
7 Copy
Common Settings: a b
1
********************* Language
2 Default Screen
3
Sound
OPERATION GUIDE
1
2
NOTE:
] [ Login ]
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
3
[ Exit ]
4
[ Exit ]
Turn on the main power switch.
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
If [Netwk Authentic.] is selected as the user
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
Press the OK key. The Common Settings menu
appears.
Preparation before Use
or
2-9
2