Kyocera FS-1128MFP Operation Manual page 230

Default Setting (System Menu)
Collate
Set the defaults for Collate. The table below shows the available settings.
Collate
NOTE:
Refer to page 3-17 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
Sys. Menu/Count.: a b
4
User/Job Account
5
User Property
6 Common Settings
*********************
Common Settings: a b
1 Language
*********************
2 Default Screen
3 Sound
Function Default: a b
1 Color Selection
*********************
2 Scan Resolution
3 FAX Resolution
Collate:
1
Off
2 *On
*********************
8-42
Item
Off Collate not performed.
On Collate performed.
[ Exit ]
[ Exit ]
[ Exit ]
a b
Description
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or
4
Press the OK key. The Function Default menu
appears.
5
Press the or
6
Press the OK key. Collate appears.
7
Press the or
key to select [Function Default].
key to select [Collate].
key to select [Off] or [On].
OPERATION GUIDE
or