Kyocera FS-1128MFP Operation Manual page 391

Login User Name
*******************
Login Password:
[ Menu
User/Job Account:a b
1 User Login Set.
********************* 2 Job Account.Set.
3 Unknown ID Job
Job Account.Set.:a b
4 Each Job Account
5
Account. List
6 Default Setting
*********************
Default Setting: a b
1 Apply Limit
*********************
2
Copy/Print Count
3 Counter Limit
Apply Limit:
1
Immediately
2 *Subsequently
*********************
3 Alert Only
OPERATION GUIDE
3
L b
] [ Login ]
NOTE:
•
•
4
[ Exit ]
5
[ Exit ]
6
7
[ Exit ]
8
9
a b
[ Exit ]
10
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
Refer to Character Entry Method on Appendix-5 for
details on entering characters.
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
In the User/Job Account menu, press the
key to select [Job Account. Set.].
Press the OK key. The Job Account. Set. menu
appears.
Press the or key to select [Default Setting].
Press the OK key. The Default Setting menu
appears.
Press the or key to select [Apply Limit].
Press the OK key. Apply Limit appears.
Press the or key to select [Immediately],
[Subsequently] or [Alert Only].
Management
or
11
11-25