Kyocera FS-1128MFP Operation Manual page 49

Administrator only.
System:
1
Network Setting
*********************
2 I/F Block Set.
3
Security Level
Network Setting: a b
1
TCP/IP Settings
*********************
2 NetWare
3
AppleTalk
TCP/IP Settings: a b
1
TCP/IP
*********************
2 IPv4 Setting
3
IPv6 Setting
TCP/IP:
1 Off
2 *On
*********************
OPERATION GUIDE
IMPORTANT:
logged in using a user ID with administrator privileges.
The default settings of the login user name and login
password are both 2800.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
a b
[ Exit ]
4
[ Exit ]
5
6
[ Exit ]
7
8
a b
To make the settings, you must have
In the System menu, press the
[Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [TCP/IP Settings].
Press the OK key. The TCP/IP Settings menu
appears.
Press the or key to select [TCP/IP].
Press the OK key. TCP/IP appears.
Preparation before Use
or key to select
2-13
2