Security Level - Kyocera FS-1128MFP Operation Manual

USB Host:
1 *Unblock
*********************
2 Block
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
3
********************* System
Login User Name:
*******************
Login Password:
[ Menu
System:
1
Network Setting
2 I/F Block Set.
*********************
3

Security Level

I/F Block Set.:
1 USB Host
2 USB Device
*********************
3
Option I/F
OPERATION GUIDE
6
a b
7
8
1
[ Exit ]
L b
] [ Login ]
2
a b
[ Exit ]
3
4
a b
[ Exit ]
5
Default Setting (System Menu)
Press the OK key. USB Host appears.
Press the or key to select [Unblock] or [Block].
Press the OK key. Completed. is displayed and the
screen returns to the I/F Block Set. menu.
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [I/F Block Set.].
Press the OK key. The I/F Block Set. menu
appears.
Press the or key to select [USB Device].
or
8
8-147