Kyocera FS-1128MFP Operation Manual page 319

Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1 Network Setting
*********************
2
I/F Block Set.
3 Security Level
Network Setting: a b
1 TCP/IP Settings
*********************
2 NetWare
3 AppleTalk
NetWare:
1 *Off
*********************
2 On
Frame Type:
1 *Auto
*********************
2 802.3
3
Ether-II
OPERATION GUIDE
1
[ Exit ]
L b
] [ Login ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
6
a b
7
a b
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [NetWare].
Press the OK key. NetWare appears.
Press the or key to select [On] or [Off].
If you select [On] and press the OK key, Frame
Type appears. Press the
desired frame type.
The available frame types are as follows:
Auto
802.3
or
or key to select the
8-131
8