Network Setup - Kyocera FS-1128MFP Operation Manual

Default Setting (System Menu)

Network Setup

The following network settings are available.
• LAN Interface Setup ...8-128
• TCP/IP (IPv4) Setup ...8-129
• TCP/IP (IPv6) Setup ...8-129
• NetWare Setup ...8-130
• AppleTalk Setup ...8-132
• Protocol Detail ...8-135
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
Network Setting: a b
1 *TCP/IP Setting
*********************
2 NetWare
3
AppleTalk
8-128
[ Exit ]
L b
] [ Login ]
a b
[ Exit ]
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2
The System menu appears.
3
Press the or
4
Press the OK key. The Network Setting menu
appears.
5
Press the or
key to select [Network Setting].
key to select [LAN Interface].
OPERATION GUIDE
or