Kyocera FS-1128MFP Operation Manual page 54

Preparation before Use
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
Login User Name:
********************
Login Password:
[ Menu
Sys. Menu/Count.: a b
1
Report
2
Counter
3 System
*********************
Administrator only.
System:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
2-18
L b
] [ Login ]
[ Exit ]
a b
[ Exit ]
1
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
NOTE:
• Refer to Character Entry Method on Appendix-5 for
details on entering characters.
• If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
2
In the Sys. Menu/Count. menu, press the
key to select [System], and then press the OK key.
IMPORTANT: To make the settings, you must have
logged in using a user ID with administrator privileges.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
In the System menu, press the
[Network Setting].
or
or key to select
OPERATION GUIDE