Kyocera FS-1128MFP Operation Manual page 369

Use the procedure below to enable user login administration.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Login User Name
*******************
Login Password:
[ Menu
Sys. Menu/Count.: a b
4 User/Job Account
*********************
5
User Property
6 Common Settings
User/Job Account: a b
1 User Login Set.
*********************
2
Job Account. Set.
3 Unknown ID Job
User Login Set.:
1 User Login
*********************
2
Local User List
OPERATION GUIDE
1
L b
] [ Login ]
NOTE:
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
2
[ Exit ]
3
[ Exit ]
4
5
a b
[ Exit ]
6
Press the System Menu/Counter key on the main
unit operation panel.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
If [Netwk Authentic.] is selected as the user
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account].
Press the OK key. The User/Job Account menu
appears.
Press the or key to select [User Login Set.].
Press the OK key. The User Login Set. menu
appears.
Press the or key to select [User Login].
Management
or
11
11-3