Default Setting (System Menu)
LDAP Security
Specify the protocol to be used for LDAP. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
Network Setting: a b
7
Secure Protocol
*********************
8
Host Name
9
LAN Interface
8-142
[ Exit
]
L b
] [ Login
]
a b
[ Exit
]
[ Exit
]
9
Press the
or
[HTTPS only].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2
The System menu appears.
3
Press the
or
4
Press the OK key. The Network Setting menu
appears.
5
Press the
or
key to select [HTTP/HTTPS] or
key to select [Network Setting].
key to select [Secure Protocol].
OPERATION GUIDE
or