Kyocera FS-1128MFP Operation Manual page 378

Management
Use the procedure below to process jobs sent from unknown users.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6 Common Settings
Login User Name
*******************
Login Password:
[ Menu
User/Job Account:a b
1 User Login Set.
2 Job Account. Set.
3
********************* Unknown ID Job
Unknown ID Job:
1 *Reject
*********************
2
Permit
11-12
[ Exit ]
L b
] [ Login ]
[ Exit ]
a b
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
4
In the User/Job Account menu, press the
key to select [Unknown ID Job].
5
Press the OK key. Unknown ID Job appears.
6
Press the or
7
Press the OK key.
Completed. is displayed and the screen returns to
the User/Job Account menu.
key to select [Reject] or [Permit].
OPERATION GUIDE
or
or