Network Security - Kyocera FS-1128MFP Operation Manual

Default Setting (System Menu)

Network Security

The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• SSL Setting ...8-138
• SNMPv3 Setting ...8-143
• IPSec Setting ...8-144
SSL Setting
This allows you to use SSL network security for communication. You can use SSL Setup to select whether or
not SSL is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
8-138
[ Exit ]
L b
] [ Login ]
a b
[ Exit ]
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2
The System menu appears.
3
Press the or key to select [Network Setting].
OPERATION GUIDE
or