Kyocera FS-1128MFP Operation Manual page 373

Sys. Menu/Count.: a b
4 User/Job Account
*********************
5 User Property
6 Common Settings
Login User Name
*******************
Login Password:
[ Menu
User/Job Account: a b
1
User Login Set.
*********************
2
Job Account. Set.
3 Unknown ID Job
User Login Set.: a b
1 User Login
2
********************* Local User List
3 IC Card Setting
Local User List:
l DeviceAdmin
*********************
Menu:
1 Detail/Edit
2
Delete
3
Add User
*********************
OPERATION GUIDE
3
[ Exit ]
4
L b
] [ Login ]
NOTE:
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
5
[ Exit ]
6
[ Exit ]
7
8
a b
[ Menu ]
9
a b
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
If [Netwk Authentic.] is selected as the user
In the User/Job Account menu, press the
key to select [User Login Set.].
Press the OK key. The User Login Set. menu
appears.
Press the or key to select [Local User List].
Press the OK key. Local User List appears.
Press [Menu] (the Right Select key), press the
or key to select [Add User], and then press the
OK key.
Management
or
or
11
11-7