Loading Envelopes - Kyocera FS-1128MFP Operation Manual

Preparation before Use

Loading Envelopes

1 envelope may be loaded in the multi purpose tray.
Acceptable envelope sizes are as follows.
Hagaki
Oufuku Hagaki
Youkei 2
Youkei 4
Monarch
Envelope #10 (Commercial #10)
Envelope DL
Envelope C5
Executive
Envelope #9 (Commercial #9)
Envelope #6 (Commercial #6 3/4)
ISO B5
2-34
4
IMPORTANT:
package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check
that there is no paper left over in the tray from a previous
job before loading the paper. If there is just a small
amount of paper left over in the multi purpose tray and
you want to add more, first remove the left-over paper
from the tray and include it with the new paper before
loading the paper back into the tray.
Acceptable Envelope
Align the paper with the paper guides and insert as
far as it will go.
Keep the side that was closest the
Size
148×100 (mm)
148×200 (mm)
162×114 (mm)
235×105 (mm)
3 7/8"×7 1/2"
4 1/8"×9 1/2"
110×220 (mm)
162×229 (mm)
7 1/4"×10 1/2"
3 7/8"×8 7/8"
3 5/8"×6 1/2"
176×250 (mm)
OPERATION GUIDE