Kyocera FS-1128MFP Operation Manual page 77

Specifying Paper Size and Media Type for the Multi Purpose Tray
To fix the type of paper to be used in the multi purpose tray, specify the paper size.When using other than a
plain paper, specify the media type.
Item
Paper Standard
Size Sizes
Others
Size
Entry
Media Type
* To change to a media type other than Plain, refer to Paper Weight on page
8-17.
NOTE:
If using the FS-1128MFP and the multi purpose tray is used to print a received FAX, the available
media types are as shown below.
Plain, Recycled, Bond, Color, High Quality and Rough
OPERATION GUIDE
Description
Select from the standard sizes. Selectable paper sizes
are as follows.
Inch size: Letter, Legal, Statement, Executive, and Oficio
II
Metric size: A4, A5, A6, B5, B6, Folio and 16K
Select from special standard sizes and custom sizes.
Selectable paper sizes are as follows.
ISO B5, Envelope #10 (Commercial #10), Envelope #9
(Commercial #9), Envelope #6 (Commercial #6 3/4),
Envelope Monarch, Envelope DL, Envelope C5, Hagaki,
Oufuku Hagaki, Youkei 4, Youkei 2
Enter the size not included in the standard size.
Selectable paper sizes are as follows.
Inch size
X (Horizontal): 5.83~14.02" (in 0.01" increments),
Y (Vertical): 2.75~8.50" (in 0.01" increments)
Metric size
X (Horizontal): 148~356 mm (in 1mm increments),
Y (Vertical): 80~216 mm (in 1mm increments)
Selectable media types are as follows.
Plain, Transparency, Rough, Vellum, Labels, Recycled,
Preprinted, Bond, Cardstock, Color, Prepunched,
Letterhead, Envelope, Thick, High Quality and Custom
1~8*
1
Press the System Menu/Counter key on the main
unit operation panel.
Preparation before Use
2-41
2