Changing User Properties - Kyocera FS-1128MFP Operation Manual

Detail:
Account Name:
k KyoceramitaOsaka

Changing User Properties

User information can be changed. It can be changed only by a user with administrator privileges.
Use the procedure below to change the user properties.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6 Common Settings
Login User Name
*******************
Login Password:
[ Menu
OPERATION GUIDE
17
C b
6/6
NOTE:
[ Change ]
the device administrator does not log in, [Change] is
not displayed.
18
1
2
[ Exit ]
3
L b
] [ Login ]
NOTE:
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
Press the key to select [Account Name:], press
[Change] (the Right Select key), select the
account, and then press the OK key.
If the user list is for device administrator and
After entering the user information, press the OK
key again.
Registered. is displayed and the screen returns to
Local User List.
Press the System Menu/Counter key on the main
unit operation panel.
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
If [Netwk Authentic.] is selected as the user
Management
or
11
11-9