Apply Limit - Kyocera FS-1128MFP Operation Manual

Login User Name
*******************
Login Password:
[ Menu
User/Job Account:a b
1 User Login Set.
2
********************* Job Account.Set.
3 Unknown ID Job
Job Account.Set: a b
1 Job Accounting
*********************
2
Account Report
3 Total Accounting
Default Setting: a b
1

Apply Limit

2
********************* Copy/Print Count
3 Counter Limit
Copy/Print Count:a b
1
Total
2 *Split
*********************
OPERATION GUIDE
3
L b
] [ Login ]
NOTE:
•
•
4
[ Exit ]
5
[ Exit ]
6
7
[ Exit ]
8
9
10
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
Refer to Character Entry Method on Appendix-5 for
details on entering characters.
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
In the User/Job Account menu, press the
key to select [Job Account. Set.].
Press the OK key. The Job Account. Set. menu
appears.
Press the or key to select [Default Setting].
Press the OK key. The Default Setting menu
appears.
Press the or key to select [Copy/Print Count].
Press the OK key. Copy/Print Count appears.
Press the or key to select [Total] or [Split].
Management
or
11
11-21