P-2812Hnu-51C Access And Login - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 26 Troubleshooting
Make sure you understand the normal behavior of the LED. See
1
page 25.
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Turn the P-2812HNU-51c off and on.
4
If the problem continues, contact the vendor.
5

26.2 P-2812HNU-51c Access and Login

I forgot the IP address for the P-2812HNU-51c.
The default IP address is https://192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the P-2812HNU-51c by looking up the IP address of the default gateway for
your computer. To do this in most Windows computers, click Start > Run, enter
cmd, and then enter ipconfig. The IP address of the Default Gateway might be
the IP address of the P-2812HNU-51c (it depends on the network), so enter this IP
address in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
Section 1.6 on page
I forgot the password.
The default admin password is 1234 and the default user password is user.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 1.6 on page
I cannot see or access the Login screen in the web configurator.
308
27.
27.
Section 1.5 on
P-2812HNU-51c User's Guide