ZyXEL Communications P-2812HNU-51c User Manual page 176

Chapter 9 Voice
Table 49 VoIP > SIP > SIP Account (continued)
LABEL
Listening
Volume Control
Active G.168
(Echo
Cancellation)
Active
VAD(Voice
Active
Detector)
Call Features
Send Caller ID
Active Call
Transfer
Active Call
Waiting
Call Waiting
Reject Timer
Active
Unconditional
Forward
Active Busy
Forward
Active No
Answer Forward
No Answer
Time
Active Do Not
Disturb
MWI (Message
Waiting
Indication)
176
DESCRIPTION
Enter the loudness that the P-2812HNU-51c uses for speech that it
receives from the peer device.
Minimum is the quietest, and Maximum is the loudest.
Select this if you want to eliminate the echo caused by the sound of
your voice reverberating in the telephone receiver while you talk.
Select this if the P-2812HNU-51c should stop transmitting when you are
not speaking. This reduces the bandwidth the P-2812HNU-51c uses.
Select this if you want to send identification when you make VoIP phone
calls. Clear this if you do not want to send identification.
Select this to enable call transfer on the P-2812HNU-51c. This allows
you to transfer an incoming call (that you have answered) to another
phone.
Select this to enable call waiting on the P-2812HNU-51c. This allows
you to place a call on hold while you answer another incoming call on
the same telephone number.
Specify a time of seconds that the P-2812HNU-51c waits before
rejecting the second call if you do not answer it.
Select this if you want the P-2812HNU-51c to forward all incoming calls
to the specified phone number.
Specify the phone number in the To Number field on the right.
Select this if you want the P-2812HNU-51c to forward incoming calls to
the specified phone number if the phone port is busy.
Specify the phone number in the To Number field on the right.
If you have call waiting, the incoming call is forwarded to the specified
phone number if you reject or ignore the second incoming call.
Select this if you want the P-2812HNU-51c to forward incoming calls to
the specified phone number if the call is unanswered. (See No Answer
Time.)
Specify the phone number in the To Number field on the right.
This field is used by the Active No Answer Forward feature.
Enter the number of seconds the P-2812HNU-51c should wait for you to
answer an incoming call before it considers the call is unanswered.
Select this to set your phone to not ring when someone calls you.
Select this if you want to hear a waiting (beeping) dial tone on your
phone when you have at least one voice message. Your VoIP service
provider must support this feature.
P-2812HNU-51c User's Guide