ZyXEL Communications P-2812HNU-51c User Manual page 259

Click Advanced > Remote MGMT > SNMP to open the following screen. Use
this screen to configure the P-2812HNU-51c SNMP settings.
Figure 119 SNMP
The following table describes the fields in this screen.
Table 90 SNMP
LABEL
SNMP Agent
Read Community Enter the Read Community, which is the password for the incoming
Set Community
System Name
System Location
System Contact
Trap Manager IP
Save/Apply
P-2812HNU-51c User's Guide
DESCRIPTION
Select Enable to allow a manager station to manage and monitor the
P-2812HNU-51c through the network via SNMP. Otherwise, select
Disable.
Get and GetNext requests from the management station. The default
is public and allows all requests.
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Enter the system name of the P-2812HNU-51c.
Specify the geographic location of the P-2812HNU-51c.
Enter the name of the person in charge of the P-2812HNU-51c.
Type the IP address of the station to send your SNMP traps to.
Click this button to save your changes back to the P-2812HNU-51c.
Chapter 18 Remote Management
259