Wan Service Statistics - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 4 Status Screens

4.2.1 WAN Service Statistics

Click Status > WLAN Service Statistics to access this screen. Use this screen to
view the WAN statistics.
Figure 23 Status > WAN Service Statistics
The following table describes the labels in this screen.
Table 8 Status > WAN Service Statistics
LABEL
Interface
Description
Received
80
DESCRIPTION
This shows the name of the WAN interface used by this connection.
A default name ipoa0, pppoa1, atmx (where x starts from 0 and is the
index number of ATM layer-2 interfaces using different VPI and/or VCI
values) or ptm0 indicates the DSL port. The pppx name (where x starts
from 0 and is the index number of PPP connection on the P-2812HNU-
51c) indicates a PPP connection via any one of the WAN interface. eth4
indicates the Ethernet WAN interface (the physical Ethernet WAN port).
The number after the dot (.) represents the VLAN ID number assigned to
traffic sent through this connection. The number after the underscore
(_) represents the index number of connections through the same
interface.
(null) means the entry is not valid.
This shows the descriptive name of this connection.
0 and 35 or 0 and 1 are the default VPI and VCI numbers. The last
number represents the index number of connections over the same PVC
or the VLAN ID number assigned to traffic sent through this connection.
(null) means the entry is not valid.
P-2812HNU-51c User's Guide