ZyXEL Communications P-2812HNU-51c User Manual page 50

Chapter 2 Tutorials
Follow the steps below to map traffic from LAN 1 to PVC 1 and traffic from LAN 2
and LAN 3 to PVC 2.
Table 4 DSL Connection Groups
GROUP
GR1
GR2
Note: Before configuring interface groups, make sure you are connected to LAN 4
which will not be in a group other than the default group. Otherwise, you need
to use the IP address of the new group to access the P-2812HNU-51c after you
apply the changes.
Note: You can also use policy forwarding to map traffic from a LAN port to a specific
PVC, but you need to enter the source IP address, port number and/or MAC
address of each packet that comes from the LAN port. See
233
Click Advanced Setup > Interface Group to open the following screen. Click
1
Add to create a new interface group GR1.
50
LAN IP ADDRESS
192.168.2.x
192.168.3.x
for more information.
LAN INTERFACE WAN INTERFACE
LAN1 ppp0 (0/33)
LAN2, LAN3 atm2 (0/34)
P-2812HNU-51c User's Guide
Chapter 14 on page