Adding Url Filter - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 20 Parental Control
The following table describes the fields in this screen.
Table 97 Parental Control > URL Filter
LABEL
Active URL Filter
URL List Type
#
Active
Address
Port
Modify
Add
Apply

20.3.1 Adding URL Filter

Click the Add button in the URL Filter screen to open the following screen.
Figure 141 URL Filter Configuration
The following table describes the fields in this screen.
Table 98 URL Filter Configuration
LABEL
URL Address
Port Number
Back
Save/Apply
278
DESCRIPTION
Select the check box to enable URL filtering on the P-2812HNU-51c.
If you select Block, the P-2812HNU-51c prohibits the users from
viewing the Web sites with the URLs listed below.
If you select Access Only, the P-2812HNU-51c blocks access to all
URLs except ones listed below.
This is the index number of the rule.
Select the check box to enable the filtering rule.
This is the URL of the web site in this rule.
This is the port number the web server uses to forward HTTP traffic.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Click Add to create a new rule.
Click this button to save your settings back to the P-2812HNU-51c.
DESCRIPTION
Enter the URL of web site to which the P-2812HNU-51c blocks or
allows access.
Specify the port number the web server uses to forward HTTP traffic.
Click this button to return to the previous screen without saving any
changes.
Click this button to save your settings back to the P-2812HNU-51c.
P-2812HNU-51c User's Guide