ZyXEL Communications P-2812HNU-51c User Manual page 108

Chapter 5 WAN Setup
Note: If you configure only one IPoA or IPoE connection using the ATM interface on
the P-2812HNU-51c, you must enter the static DNS server address.
Figure 43 WAN Configuration: DNS Server: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 25 WAN Configuration: DNS Server: PPPoE, PPPoA, IPoE or IPoA
LABEL
Select DNS
Server Interface
from available
WAN interfaces
Selected DNS
Server Interfaces
Available WAN
Interfaces
Use the following
Static DNS IP
address
Primary DNS
server
108
DESCRIPTION
Select this to have the P-2812HNU-51c get the DNS server addresses
from the ISP automatically.
Select a WAN interface through which you want to obtain the DNS
related information.
Select a WAN interface in the Available WAN Interfaces and use
the left-facing arrow to move it to the Selected DNS Server
Interfaces to use that interface as the DNS server.
To remove a WAN interface from the Selected DNS Server
Interfaces, use the righ-facing arrow.
The interface on the top of the list gets the highest priority.
Select this to have the P-2812HNU-51c use the DNS server addresses
you configure manually.
Enter the first DNS server address assigned by the ISP.
P-2812HNU-51c User's Guide