Navigation Panel - ZyXEL Communications P-2812HNU-51c User Manual

As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar

3.2.1 Navigation Panel

Use the menu items on the navigation panel to open screens to configure P-
2812HNU-51c features. The following tables describe each menu item.
Table 6 Navigation Panel Summary
LINK TAB
Status
Network
WAN Layer 2
Interface
Internet
Connection
LAN IP
Wireless LAN General
More AP
WPS
WPS Station
WDS
Advanced
Setup
NAT Port
Forwarding
Trigger Port
DMZ Host
ALG
P-2812HNU-51c User's Guide
Chapter 3 Introducing the Web Configurator
FUNCTION
This screen shows the P-2812HNU-51c's general device and
network status information. Use this screen to access the
statistics and client list.
Use this screen to add or remove a DSL PTM (Packet Transfer
Mode) interface.
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
Use this screen to configure LAN TCP/IP, DHCP and IP alias
settings.
Use this screen to configure the wireless LAN settings, WLAN
authentication/security settings and MAC filtering rules.
Use this screen to configure multiple BSSs on the P-2812HNU-
51c.
Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
Use this screen to use WPS to set up your wireless network.
Use this screen to set up Wireless Distribution System links to
other access points.
Use this screen to configure the advanced wireless LAN settings.
The NAT screens are available only when you enable NAT in a
WAN connection.
Use this screen to make your local servers visible to the outside
world.
Use this screen to change your P-2812HNU-51c's port triggering
settings.
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
Use this screen to allow SIP sessions to pass through the P-
2812HNU-51c.
69