The Service Control Screen - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 18 Remote Management

18.5 The Service Control Screen

Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which P-
2812HNU-51c interface.
Figure 120 Service Control
The following table describes the fields in this screen.
Table 91 Access Control: Services
LABEL
Service Control
#
Services
LAN
WAN
Apply
260
DESCRIPTION
Select Enable to turn on service control. Otherwise, select Disable.
This is the index number of the entry.
This is the service you may use to access the P-2812HNU-51c.
Select the Enable check box for the corresponding services that you
want to allow access to the P-2812HNU-51c from the LAN.
Select the Enable check box for the corresponding services that you
want to allow access to the P-2812HNU-51c from the WAN.
Click this button to save your changes back to the P-2812HNU-51c.
P-2812HNU-51c User's Guide