Adding A Qos Queue - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 16 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 80 QoS Queue Setup
LABEL
Add
No.
Active
Name
Interface
Priority
Weight
Buffer
Management
Rate Limit
Modify
Apply

16.4.1 Adding a QoS Queue

Click the Add button or the edit icon in the Queue Setup screen to configure a
queue.
Figure 112 QoS Queue Setup: Add
242
DESCRIPTION
Click this button to create a new entry.
This is the index number of this entry.
Select the check box to enable the queue.
This shows the descriptive name of this queue.
This shows the name of the P-2812HNU-51c's interface through which
traffic in this queue passes.
This shows the priority of this queue.
This shows the weight of this queue.
This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the P-2812HNU-51c
should handle packets when it receives too many (network congestion).
This shows the maximum transmission rate allowed for traffic on this
queue.
Click the Edit icon to go to the screen where you can edit the queue.
Click the Remove icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Click Apply to save your changes back to the P-2812HNU-51c.
P-2812HNU-51c User's Guide