Before You Begin; The Sip Settings Screen - ZyXEL Communications P-2812HNU-51c User Manual

9.1.3 Before You Begin

• Before you can use these screens, you need to have a VoIP account already set
up. If you don't have one yet, you can sign up with a VoIP service provider over
the Internet.
• You should have the information your VoIP service provider gave you ready,
before you start to configure the P-2812HNU-51c.

9.2 The SIP Settings Screen

The P-2812HNU-51c uses a SIP account to make outgoing VoIP calls and check if
an incoming call's destination number matches your SIP account's SIP number. In
order to make or receive a VoIP call, you need to enable and configure a SIP
account, and map it to a phone port. The SIP account contains information that
allows your P-2812HNU-51c to connect to your VoIP service provider.
Use this screen to maintain information about each SIP account. You can also
enable and disable each SIP account. To access this screen, click VoIP > SIP >
SIP Account.
Figure 78 VoIP > SIP > SIP Account
P-2812HNU-51c User's Guide
Chapter 9 Voice
173