ZyXEL Communications P-2812HNU-51c User Manual page 311

I cannot access the Internet through a DSL connection.
Check if you set the DSL/WAN switch (on the back of the P-2812HNU-51c) to the
1
DSL side to have the P-2812HNU-51c use the DSL port for Internet access.
Make sure you configured a proper ATM or PTM layer-2 interface and WAN services
2
with the Internet account information provided by your ISP.
If you set up a WAN connection using bridging service, make sure you turn off the
3
DHCP feature in the LAN screen to have the clients get WAN IP addresses directly
from your ISP's DHCP server.
I cannot access the Internet through an Ethernet WAN connection.
Check if you set the DSL/WAN switch (on the back of the P-2812HNU-51c) to the
1
WAN side to have the P-2812HNU-51c use the Ethernet WAN port for Internet
access.
Make sure you connect the Ethernet WAN port to a DSL modem or router in your
2
netwrok.
Make sure you configured a proper Ethernet layer-2 interface and WAN services
3
with the Internet account information provided by your ISP.
If you set up a WAN connection using bridging service, make sure you turn off the
4
DHCP feature in the LAN screen to have the clients get WAN IP addresses directly
from your ISP's DHCP server.
I cannot connect to the Internet using a second DSL connection.
ADSL and VDSL connections cannot work at the same time. You can only use one
type of DSL connection, either ADSL or VDSL connection at one time.
I cannot create multiple connections of the same type.
Your layer-2 interface must be in VLAN MUX Mode or MSC mode to create multiple
WAN serivces for each connection.
P-2812HNU-51c User's Guide
Chapter 26 Troubleshooting
311